This improved liner diverter adapter facilitates the installation of a wood stove insert when the chimney flue is offset from the stove's flue collar.

This kit contains: 2x pipe clamps and 1x outside wall termination.

Kit contains: 1x adapter, 2x pipe clamps, 1x outside wall termination and screws.

Kit contains: 1 X Adapter, 2 X Pipe clamps, 1 X Outside wall termination and Screws. The screws quantity may differ depending on the kit.

Made of aluminum and heat resistant insulating wool.

Allows to attach the flexible liner to an insert’s flue collar from inside the firebox.

Reinforced aluminized trilaminate with fiberglass insulation. Fits on some adapter models for fresh air intake kit with a diameter of 5 ". Length: 4 feet.

Made of two plies black polyester with fiberglass insulation.

Certified according to ULC S110/UL 181, this insulated flexible air duct is composed of four (4) layers of polyester encapsulating a galvanized wire; all assembled with a flame retardant adhesive. Fully water repellent, the duct is corrosion resistant as well as high static pressure thanks to the unique four-layer lamination process and wall thickness. The insulation contains no hazardous substances that may pose a health hazard.

Certified according to ULC S110/UL 181, this insulated flexible air duct is composed of four (4) layers of polyester encapsulating a galvanized wire; all assembled with a flame retardant adhesive. Fully water repellent, the duct is corrosion resistant as well as high static pressure thanks to the unique four-layer lamination process and wall thickness. The insulation contains no hazardous substances that may pose a health hazard.

Fits on the following Enerzone models: Solution 1.6, 1.8, 2.3 and 2.9.