•Fire Starter (50u)
•Stove paint 85g
•High quality gloves
•Digital moisture reader
•Glass cleaner 16.9 oz
•Double wall stove pipe probe thermometer

Dries to seal cracks and joints to prevent smoke or air leaks. SBI Stove & Furnace Cement may be used in stoves, furnaces, boilers, fireplaces (all fuels), combustion chambers, firedoors, flue and chimney joints, brick linings, gasketing.

This filter HEPA allows to trap effectively the small particles of dry waste. The air sucked up by the sweeper is filtered and cleared of a very big part of allergens, for a healthier air. Resistant and easy to clean, it is enough to shake it or to rinse to remove the impurities.

For a greater longevity of the engine of your sweeper, add on your filter HEPA, it pre-filters cloth and metal sootstop. Specially designed to trap effectively the particles of very small sizes so fine and volatile as the ash, it will preserve all its power of suction in spite of the accumulation of dusts. Easy maintenance: shake it simply or wash it. Replace immediately if the fabric is damaged.

Maximize the efficiency of your pellet appliance using the proper service tools! The kit includes: A stainless steel bristled brush along with a long scraper featuring a tough steel blade and an ergonomic handle. Efficiently removes the hardened buildup on the burn pot surface and holes, as well as the outlet of the pellet supply auger housing. A 3" (76 mm) diameter chimney brush (1/4"-20 thread) with flexible rods allowing cleaning up to 10 feet (3.04 m). To ease maintenance of exhaust systems with offsets. A nylon bristled tapered brush with a long steel rod and a wooden handle. Ideal for tight spaces and diameters between 1" (25 mm) and 2 1/4" (57 mm). A glass cleaner (500 mL-16.9 fl.oz.). Used regularly, it prevents permanent stains on the glass.

Maximize the efficiency of your pellet appliance using the proper service tools! The kit includes: A stainless steel bristled brush along with a long scraper featuring a tough steel blade and an ergonomic handle. Efficiently removes the hardened buildup on the burn pot surface and holes, as well as the outlet of the pellet supply auger housing. A 4" (102 mm) diameter chimney brush (1/4"-20 thread) with flexible rods allowing cleaning up to 10 feet (3.04 m). To ease maintenance of exhaust systems with offsets. A nylon bristled tapered brush with a long steel rod and a wooden handle. Ideal for tight spaces and diameters between 1" (25 mm) and 2 1/4" (57 mm). A glass cleaner (500 mL-16.9 fl.oz.). Used regularly, it prevents permanent stains on the glass.

Nettoyez régulièrement vos conduits d'évacuation pour maintenir une efficacité optimale de votre appareil. Cette brosse 3"Ø, bien que fabriquée à partir de brins souples, sera tout aussi efficace. Spécifiquement conçue pour simplifier le ramonage d'évent à granules, notamment lorsque l’installation comporte des coudes 45° ou 90°.

Regularly clean your vent pipes to maintain optimal efficiency of your appliance. This 4"Ø brush, although made from flexible bristles, will be equally effective. Specifically designed to simplify pellet vent sweeping, in particular with installation that have 45° or 90° elbows.

Useful to sweep your pellet stove vent pipe #AC04503 #AC04504, #AC04505 ou #AC04506. Note: ¼"-20 thread and ¼"NPT are NOT compatible.

Ideal for connecting a 3/8" NPT male pipe thread to 1/4" NPT female thread.

Thermal protective gloves with long cuffs (19" or 48 cm): 

•  Ideal for stove, fireplace and barbecue
•  Highly resistant to high temperatures
•  Genuine leather and kevlar seams for increased durability
•  Maximum protection against all heat sources (covers the entire forearm)
•  Strong and flexible glove with reinforcement at the level of the hand
•  One-sized with cotton lining for comfort
•  Practical leather support buckle

Easily cleans the soot from glass without water.

Recommended for cleaning the glass of any type of wood-burning appliance.

Recommended for cleaning the glass of any type of gas burning appliance.